DM50

MODEL DM50 GUNDRILL

The DM50 Model gundrill machines have been specially designed for the North American market where accuracy, flexibility, robustness, and low cost operation are key customer requirements.

This machine is ideally suited for the Medical Industry, where small diameters and specialty materials are the norm.

The DM50 Model gundrill machine is available in single or dual spindle versions. Dual spindle Models can be configured with a common drill slide or independently operated drill slides.

The DM Series machines can be automated to meet customer productivity requirements.

MODEL DM50 SPECIFICATIONS

Minimum drill Ø	0.9 mm	0.035 in.
Maximum drill Ø	10.0 mm	0.40 in.
Maximum drill depth	As required
Spindle type	Motorized
Spindle power (@ 3000 rpm)	1.7 kW	2.3 Hp
Spindle power (@ 7800 rpm)	2.8 kW	3.8 Hp
Spindle power (@ 22,500 rpm)	1.5 kW	2.0 Hp
Spindle rpm range	1,000 - 24,000
Coolant capacity	450 l	120 gal
HP pump power	3.7 kW	5.0 Hp
Maximum coolant pressure	207 bar	3,000 PSI

Download DM50 Series Brochure

To request more information or a machinery quote, click on the link above.

Tool Steadies

Special care has been taken to minimize the “lost” length. A total of 4 tool steadies can be used, each requiring only 3/4” of additional drill stroke. When no tool steadies are utilized, the lost length can be reduced to as little as 1/2”. Gundrilling of extremely long holes, up to 200 times drill diameter, is possible.

Tailstock Options

The DM Series gundrill machine can be equipped with a variety of tailstock configurations, depending on part type, method of load and unload, and flexibility desired.

VFD motor and precision spindle with interchangeable precision collets for O.D. clamping of workpieces.

Motor and gearbox driven counter-rotation with hydraulically actuated clamping cone part clamping.

Workpiece Fixtures

Special workpiece fixturing can be designed for most any application; gundrilling of connecting rods, fuel injectors, valve bodies, injection molds, etc…